Storage Tank Level and Leak Alarms & Monitors

• Aboveground Fueling Systems

• Aviation Fueling Systems

• Aboveground Installation

• Underground Fueling Systems

• Vehicle Lubrication Systems

• Mascott Service Department

• Mascott Monthly Specials

• About Us/Credit Application

• Employment Opportunuities

• Upcoming Events

Complete equipment specifications and quotations available on request

ALARMS & MONITORS (Electric & Battery)	(Click on details for additional information. Requires Adobe Reader,a free download available by clicking here). Click here for tank level monitors w/alarms & leak detection		Items with this button are orderable online
	MORRISON BROS MODEL 918 — Type: Combined mechanical tank level gauge and high level alarm for 2" tank opening. Utilizes the mechanical model 818 gauge (with alarm dial and internal switch) with a battery-powered, intrinsically safe alarm unit mounted remote from the gauge. Features: The alarm (audible only) is set for the desired level during installation and can be reset at any time to address changes in alarm requirement. The 90dB high pitched 'beep' cycle alarm (which features a pushbutton test switch) is powered by two 9v batteries and is housed in a plastic, weatherproof housing. Model 918-0100AG (2" MPT connection) … $754.21	Info (104kb)
	OPW MODEL 144TA-036 — Type: Single channel lithium battery powered liquid level tank alarm. Provides audible and visual notification. Intrinsically safe. Requires no calibration and installs easily into a 1" tank opening. May be assembled remotely or directly atop the tank. Designed for use in tanks up to 15' high/deep. Features: All stainless steel construction within the tank, expanding the number of fluid applications. Nylon w/Buna seal wire grommet, closed-cell Buna float and stainless steel rod, stainless steel pipe. Polybutylene Terephthalate enclosure. The audible alarm is rated at 90dB 4' away.	Install (127kb)
	OPW MODEL 444TA-0100 — Type: Four channel lithium battery powered liquid level tank alarm. Provides audible and visual notification. Intrinsically safe. Requires no calibration and installs easily into a 1" tank opening. May be assembled remotely or directly atop the tank. Designed for use in tanks up to 15' high/deep. Features: All stainless steel construction within the tank, expanding the number of fluid applications. Nylon w/Buna seal wire grommet, closed-cell Buna float and stainless steel rod, stainless steel pipe. Polybutylene Terephthalate enclosure. The audible alarm is rated at 90dB at 4' away.
	PNEUMERCATOR MODELS LC1000 — Type: Alarm console for high level notification (and, using a multi-switch probe on a multi-input console high high, low and low low level notification as well). This line also can be used in leak sensing. Features: The LC1000 series console provides audible and visual alarm notification for one to four different inputs. A printer is not available with this model. Housed in a NEMA-4X enclosure, the console includes alarm light(s), non-discriminating sensor or probe connection(s), dry contact relay(s), test and reset buttons and a 90dB minimum alarm horn.	Info (620kb)
	PNEUMERCATOR LC1000 SERIES SENSORS: Float Switches — Pneumercator LS600-LDBN: Non-discriminating for sumps, dispenser pans and steel tank interstitial spaces. For use with fuels. Pneumercator LS610: Non-discriminating for fiberglass tank 'dry' interstitial spaces. Pneumercator RSU800: Non-discriminating for brine-filled fiberglass tank 'wet' interstice. Pneumercator LS600-LDSN: Non-discriminating for sumps, dispenser pans and steel tank interstitial spaces. For use with chemicals. Pneumercator LS600-LDSS: Non-discriminating for sumps, dispenser pans and steel tank intertsitial spaces. For use with chemicals.	Info (1.12mb)
	High Level Switches — Pneumercator LS600AB: For fuels, with brass shaft and 1.5" stainless steel float. Set point is 8" from top of tank. Mounts to 2" tank opening. Pneumercator LS600SB: For fuels, with brass shaft and 1.5" stainless steel float. Set point is either 6", 8", 12" or 16" from the top of tank. Includes NEMA-7electrical housing. Mounts to 2" tank opening. Pneumercator LS600AS: For aviation fuels, chemicals and water. Stainless steel shaft and 1.5" stainless steel float. Set point is 8" from the top of tank. Mounts to 2" tank opening. Pneumercator LS600SS: For aviation fuels, chemicals and water. Stainless steel shaft and 1.5" stainless steel float. Set point is either 6", 8", 12" or 16" from the top of tank. Includes NEMA-7 electrical housing. Mounts to 2" tank opening. Custom Level Switches — Pneumercator LS600CB: Custom probe for fuels, with brass shaft, 1.5" stainless steel float. One to four float positions. Includes NEMA-7 electrical housing. Mounts to 2" tank opening. Available in probe length to 144". Pneumercator LS600CS: Custom probe for aviation fuels, chemicals and water. Stainless steel shaft, 1.5" stainless steel float. One to four float positions. Includes NEMA-7 electrical housing. Mounts to 2" tank opening. Available in probe length to 144".

	PNEUMERCATOR MODEL LC2000 — Type: Expanded capacity console for high product level notification (and, with a multi-switch probe, high high, low and low low level notification as well). This line also can be used in leak sensing utilizing discriminating and non- discriminating sensors. This unit is available with expansion options for an internal communications card (ModBus, ethernet, phone modem or phone/fax modem) and one relay/input card for four, eight or 16 relays. Features: Available with four, eight, 12 or 16 inputs, this model includes an integrel printer option. Housed in a NEMA-12 enclosure with a lockable door (NEMA-4 and 4X enclosures are available options), the console includes the front panel digital display with operating pushbuttons, alarms, lights and horn. Also supplied with one each RS-232 and RS-485 port, two 10 amp relaysand two dry contact inputs.	Info (603kb)
	PNEUMERCATOR LC2000 SERIES SENSORS: Float Switches — Pneumercator LS600-LDBN: Non-discriminating for sumps, dispenser pans and steel tank interstitial spaces. For use with fuels. Pneumercator LS610: Non-discriminating for fiberglass tank 'dry' interstitial spaces. Pneumercator LS600-S —Non-discriminating side-mount leak/high level switch. Pneumercator LS600-LDSN: Non-discriminating for sumps, dispenser pans and steel tank interstitial spaces. For use with chemicals. Pneumercator LS600-LDSS: Non-discriminating for sumps, dispenser pans and steel tank intertsitial spaces. For use with chemicals. Pneumercator RSU800: Discriminating hydrostatic reservoir switch with high & low level alarms. Pneumercator RSU801F: Discriminating hydrostatic reservoir switch with fault detection and common alarm. High Level Switches — Pneumercator LS600AB: For fuels, with brass shaft and 1.5" stainless steel float. Set point is 8" from top of tank. Mounts to 2" tank opening. Pneumercator LS600SB: For fuels, with brass shaft and 1.5" stainless steel float. Set point is either 6", 8", 12" or 16" from the top of tank. Includes NEMA-7electrical housing. Mounts to 2" tank opening. Pneumercator LS600AS: For aviation fuels, chemicals and water. Stainless steel shaft and 1.5" stainless steel float. Set point is 8" from the top of tank. Mounts to 2" tank opening. Pneumercator LS600SS: For aviation fuels, chemicals and water. Stainless steel shaft and 1.5" stainless steel float. Set point is either 6", 8", 12" or 16" from the top of tank. Includes NEMA-7 electrical housing. Mounts to 2" tank opening. Custom Level Switches — Pneumercator LS600CB: Custom probe for fuels, with brass shaft, 1.5" stainless steel float. One to four float positions. Includes NEMA-7 electrical housing. Mounts to 2" tank opening. Available in probe length to 144". Pneumercator LS600CS: Custom probe for aviation fuels, chemicals and water. Stainless steel shaft, 1.5" stainless steel float. One to four float positions. Includes NEMA-7 electrical housing. Mounts to 2" tank opening. Available in probe length to 144".	Info (1.12mb)
	KRUEGER LEVEL ALARM — Type: Battery-powered, non-contact magnetic reed switch system used with multiple Krueger gauge types (Therma, Direct, Leak, Overfill and Barrel). Weather resistant, semi-waterproof (cannot be submerged) and possessing an operating range of 32° to 140° F. Can be provided with an optional set of dry contacts (2 amp) to switch on/off an external device. Features: 110dB audible alarm powered by a 9v Lithium battery. Can be set for high level, low level or leak detection notification. Also available for remote alarm use.
	OPW CONTINUOUS VACUUM MONITORING SYSTEM (CVMS) — Type: Regulatory compliance release addressing the California State Water Resources Board AB2481 regulation pertaining to requirements for continuous monitoring of contained areas for leaks. The CVMS establishes a standard vacuum of 20" of water column within the interstice of secondarily contained tanks, sumps and product lines. Even the slightest loss of vacuum (in excess of an allowable limit) or the detection of liquid —hydrocarbon or water — will signify the possibility of a leak and put the system into alarm condition. The system may also initiate positive Submersible Turbine Pump (STP) shutdown as a result of a vacuum or liquid alarm condition as required by local regulatory agencies. Features: A primary feature of the CVMS system is built-in diagnostics that allow the system to pinpoint the precise location of a leak in the event of an alarm condition. The system pulls a smaller vacuum (-0.72psi) on the containment system, thus the containment system is less prone to fitting failures caused by the higher vacuum levels of competitive systems. The CVMS is less susceptible to false alarms than brine systems due to changing environmental-influenced conditions on tanks, sumps and piping. The system can operate as stand-alone or can interface with a automatic tank gauge system. You are not restricted to having a specific tank gauge system installed on site in order to meet regulatory requirements .	Specs (703kb)

Items above are not representative of our entire product line. They are for information/assistance purposes.