• Aboveground Fueling Systems

• Aviation Fueling Systems

• Aboveground Installation

• Underground Fueling Systems

• Vehicle Lubrication Systems
© 2007 Mascott Equipment Co. Inc
Complete equipment specifications and quotations available on request
BURIAL
PIPING (flex)		  
(Click on details for additional information. Requires Adobe Reader,a free download available by clicking here).
Click here for APT's flexible marina/aboveground piping.
   
Items with this button
are orderable online
  APT 'XP' BURIAL FLEXIBLE PIPE — UL listed flexible underground piping that can be
used in both pressure and suction applications in the 1 1/2", 1 3/4" and 2" sizes. Available
in sizes from 1" to 2 1/2", the doublewall pipe's controlled flexibility permits continuous
piping runs for fast and easy installation in any season. And in installing the primary and
secondary piping simultaneously, installation is cost-effective.

APT XP hose features Nylon 12 construction throughout and no polyethylene. It's the
preferred fuel line for the world's largest auto makers. The layered piping construction
consists of all high grade materials, the benefit to the user being no possibility of piping
later delamination.

The 1" size of this pipe is typically used for remote feed and fill for heaters, boilers and
emergency generators.

All APT pipe diameters are working pressure rated for 100psi.

1" DOUBLEWALL BURIAL PIPE - APTXP100-SC-xxx, 1.470 OD, 36.00" bend radius.
1 1/2" DOUBLEWALL BURIAL PIPE - APTXP150-SC-xxx, 1.900" OD, 36.00" bend radius.
1 1/4" DOUBLEWALL BURIAL PIPE - APTXP175-SC-xxx, 2.150" OD, 36.00" bend radius.
2" DOUBLEWALL BURIAL PIPE - APTXP200-SC-xxx, 2.650" OD, 36.00" bend radius.

  
Info
(293kb)
    
4" Ducting            
  APT 4" DUCTING — Allows for pipe removal without the need for extensive evacuation.
The 4" inside diameter of the ducting allows product piping to be easily slid through during
installation or removal. APT's ducting is used for retractability only; it does not serve as a
containment layer.

4" CORRUGATED DUCTING - APTDCT-400-xxx
FLEXIBLE DUCTING CONNECTOR w/CLAMPS - APTDCT-400-F

  
Info
(389kb)
    
Fittings            
  APT XP CLAMSHELL SWIVEL FITTINGS — Fittings manufactured from solid brass, with two
Viton® o-rings protected in grovves located on the inside of the connector. Blue plated
clamps secure the fitting to the pipe.       XP series fittings are to be used only with XP series
piping.

1 1/2" XP CLAMSHELL SWIVEL FITTING - APTMS-XP-150-150, installs on 1 1/2" XP pipe,      
      provides 1 1/2" NPT.
1 3/4" XP CLAMSHELL SWIVEL FITTING - APTMS-XP-175-200, installs on 1 3/4" XP pipe,      
      provides 2" NPT.
2" XP CLAMSHELL SWIVEL FITTING - APTMS-XP-200-200, installs on 2" XP pipe,
      provides 2" NPT.

  
Info
(60kb)
    
  APT XP CLAMSHELL NON-SWIVEL FITTINGS — One piece fittings manufactured from solid
brass providing the same high quality and environmental security as the swivel fitting but at a
more economical price. Blue plated clamps secure the fitting to the pipe. XP series fittings are
to be used only with XP series piping.

1" XP CLAMSHELL NON-SWIVEL FITTING - APTMN-XP-100-100, installs on 1" XP pipe,
      provides 1" NPT.
1 1/2" XP CLAMSHELL NON-SWIVEL FITTING - APTMN-XP-150-150, installs on 1 1/2" XP
      pipe, 1 1/2" NPT.
1 3/4" XP CLAMSHELL NON- SWIVEL FITTING - APTMN-XP-175-200, installs on 1 3/4""
      XP pipe, 2" NPT.
2" XP CLAMSHELL NON-SWIVEL FITTING - APTMN-XP-200-200, installs on 2" XP pipe,
      provides 2" NPT.

  
Info
(60kb)
    
  APT XP SWAGE SWIVEL FITTINGS — Manufactured of stainless steel and designed with
the same proven technology as APT's clamshell fittings. Requires no specialized connection
tees or elbows. XP series fittings are to be used only with XP series piping.

1 1/2" XP SWAGE SWIVEL FITTING - ATPMS-XP-SW-150-150, installs on 1 1/2" XP pipe,      
      provides 1 1/2" NPT.
1 3/4" XP SWAGE SWIVEL FITTING - ATPMS-XP-SW-175-200, installs on 1 3/4" XP pipe,      
      provides 2" NPT.
2" XP SWAGE SWIVEL FITTING - ATPMS-XP-SW-200-200, installs on 2" XP pipe,
      provides 2" NPT.

  
Info
(55kb)
    
Flexible
Entry Boots		            
  APT FLEXIBLE ENTRY BOOTS — Two piece boots made from oil and gasoline-resistant
nitrile rubber and including stainless steel studs and corrosion-resistant nuts and washer
plates. Designed for use with XP piping and rigid piping or electrical conduits.

The boot size designations corrospond directly with the size of pipe being used. Any boot for
a singlewall pipe can be converted tio work for a doublewall pipe simply by removing the insert
in the pipe opening.

These boots will work on round sumps of 36" diameter or larger.
  
Info
(193kb)
    
             
    FOR 1/2" CONDUIT - APTFEB-050-D

FOR 3/4" CONDUIT - APTFEB-050-SC

FOR 3/4" & 1" CONDUIT - APTFEB-075-D

FOR 1" CONDUIT - APTFEB-075-SC
 
FOR 1" DW XP PIPE - APTFEB-100-SC
 
FOR 1 1/2" DW XP PIPE - APTFEB-150-SC
 
FOR 1 3/4" DW XP PIPE - APTFEB-175-SC
 
FOR 2" DW XP PIPE - APTFEB300SC

FOR 2" SW FIBERGLASS PIPE - APTFEB-175SC
 
FOR 3" SW FIBERGLASS PIPE - APTFEB-300-R
 
FOR 4" SW FIBERGLASS PIPE - APTFEB-400-R
        
Items above are not representative of our entire product line. They are for information/assistance purposes.