• Aboveground Fueling Systems

• Aviation Fueling Systems

• Aboveground Installation

• Underground Fueling Systems

• Vehicle Lubrication Systems
© 2007 Mascott Equipment Co. Inc
Complete equipment specifications and quotations available on request
Hose Reels  
(Click on details for additional information. Requires Adobe Reader,a free download available by clicking here).
   
Items with this button
are orderable online
Manual -or-
Power Rewind
  


 
   
  DURO MANUFACTURING 2900 SERIES — Type: Hand rewind.      For hose sizes: 1/4" ID
(5/8" OD), 3/8" ID (3/4" OD), 1/2" ID (7/8" OD), 3/4" ID (1 1/4" OD), 1" ID (1 1/2" OD).      
Used for: Suitable for most liquids and gases.      Sold without hose. Aluminum axle and
steel riser. Direct rewind by hand crank. Standard reels re-wind clockwise. Reel furnished with
a red powder coat finish.

  
Parts
(86kb)
    
  DURO MANUFACTURING 3300 SERIES — Type: Power rewind.      For hose sizes: 1/4" ID
(5/8" OD), 3/8" ID (3/4" OD), 1/2" ID (7/8" OD), 3/4" ID (1 1/4" OD), 1" ID (1 1/2" OD).
Used for: Suitable for most liquids and gases.      Sold without hose. Aluminum axle and
steel riser. Motor is mounted on the left side rear, and swivel inlet is also on the left side.
Reel furnished with a powder coat finish.

  
Parts
(92kb)
    
  DURO MANUFACTURING 3400 SERIES — Type: Power rewind.       For hose sizes: 1" ID
(1 1/2" OD), 1 1/4" ID (1 3/4" OD), 1 1/2" ID (2" OD).      Used for: Suitable for most liquids
and gases.      Sold without hose. Aluminum axle and steel riser. Motor is mounted on the
left side rear, and swivel inlet is also on the left side. Reel furnished with a powder coat
finish.

  
Parts
(89kb)
    
  HANNAY REELS SERIES 1 1/2" — Type: Manual or power rewind.       For hose sizes:
1" ID (1.58" OD), 1 1/2" ID (1.89" OD), 1 3/8" ID (2" OD), 1 1/2" ID (2.06" OD).
Used for: Petroleum applications.       Sold without hose. Gear-driven crank rewind or chain
and sprocket drive powered by an electric, hydraulic or compressed air motor. Auxiliary crank
rewind available for power rewind reels. 90° ball bearing swivel joint with 2" victaulic groove
and 1 1/2" FPT threads. For pressures to 600psi and temperatures from -40° to +175° F.

  
Parts
(Drum <30")
(236kb)
Parts
(Drum >30")
(248kb)
    
  HANNAY REELS SERIES 2" — Type: Manual or power rewind.       For hose sizes:
1 1/2" ID (2.06" OD), 2" ID (2.67" OD).       Used for: Petroleum applications.       Sold
without hose. Gear-driven crank rewind or chain and sprocket drive powered by an electric,
hydraulic or compressed air motor. Auxiliary crank rewind available for power rewind reels.
Comet brake on power rewind models without the optional hand crank. 90° ball bearing
swivel joint with 2" victaulic groove and flanged riser with 2" FPT threads. For pressures to
600psi and temperatures from -40° to +175° F.

 
Parts
(246kb)
    
  HANNAY REELS IV SERIES — Type: Power rewind.       For hose sizes: 1 1/4" ID
(1.81" OD), 1 1/2" ID (2.06" OD), 2" ID (2.56" OD).       Used for: Petroleum applications.       
Sold without hose. Gear-driven crank rewind or chain and sprocket drive powered by an
electric, hydraulic or compressed air motor. Comet brake. air caliper brake supplied
standard. 90° ball bearing swivel joint with 2" victaulic groove and flanged riser with
1 1/2" FPT threads. For pressures to 600psi and temperatures from -40° to +175° F.

 
   
  HANNAY REELS IV 5000 SERIES — Type: Single wrap power rewind.       For hose
sizes: 1 3/8" ID (2" OD), 1 1/2" ID (2.06" OD), 2" ID (2.56" OD).        Used for: Petroleum applications.       Sold without hose. Gear-driven crank rewind or chain and sprocket drive
powered by an electric, hydraulic or compressed air motor. Auxiliary crank rewind available.
12v rewind, comet brake standard. For pressures to 600psi and temperatures from -40° to
+ 175° F. 5100 series: 90° ball bearing swivel joint with 2" victaulic groove and flanged riser
with 1 1/2" FPT threads. 5200 series: 90° ball bearing swivel joint with 2" victaulic groove
and flanged riser with 2" FPT threads.

      
Spring Rewind
(Low pressure)		        
 

DURO MANUFACTURING 1200 SERIES — Type: Spring rewind.       For hose sizes: 1/4"
ID, 3/8" ID, 1/2" ID.      Used for: Low pressure (300psi) air and water dispensing.
Sold with hose. All brass swivel joints w/double o-ring seals are secured independently
from other moving parts. Reel turns on a bronze, self-lubricating bearing fitted to a solid
1" diameter axle. Parts are powder coated or treated before assembly. Aluminum spring
arbor releases spring in case of backlash.

 
Parts
(77kb)
    
  LINCOLN LFR SERIES — Type: Spring rewind with select models including hose end
control valve (water bibb or air chuck).        For hose sizes: 1/4" ID (30', 50'), 3/8" (30', 50'),
1/2" (50').       Used for: Low pressure (250psi for 1/4" and 3/8" hose, 200psi for 1/2" hose) air
and water service.        All models sold with hose, connecting hose -and ball stop.

      
  ALEMITE 8078 SERIES — Type: Spring rewind.      For hose sizes: 1/4" ID (30', 50'), 1/2"
ID (50').       Used for: Low pressure (200psi) air and water service.     Sold with hose,
connecting hose and ball stop.  

  
Parts
(776kb)
    
Spring Rewind
(Medium press.)		          
  DURO MANUFACTURING 1300 SERIES — Type: Spring rewind.       For hose sizes: 3/8"
ID, 1/2" ID in 20', 30', 40' and 50' lengths.      Used for: Medium pressure (2500psi) oil, gear
oil, anti-freeze and ATF applications.       Sold with hose. All brass swivel joints w/double
o-ring seals are secured independently from other moving parts. Reel turns on a bronze,
self-lubricating bearing fitted to a solid 1" diameter axle. Parts are powder coated or treated
before assembly. Aluminum spring arbor releases spring in case of backlash.

  
Parts
(85kb)
    
  LINCOLN LFR SERIES — Type: Spring rewind.        For hose sizes: 1/2" ID (20', 30', 40',
50'),  5/8" ID ( 50' only)..       Used for: Medium pressure (1500psi) for oil, gear oil, anti-freeze
and ATF applications.        All models sold with hose, connecting hose and ball stop.

      
  ALEMITE 8078 SERIES — Type: Spring rewind.      For hose sizes: 1/4" ID (30', 50'), 3/8"
ID (50').       Used for: Medium pressure (6400psi) oil, gear oil, anti-freeze and ATF
applications.     Sold with hose, connecting hose and ball stop. 

  
Parts
(776kb)
    
Spring Rewind
(High pressure)		        
  DURO MANUFACTURING 1300 SERIES — Type: Spring rewind.       For hose sizes: 3/8"
ID, 1/2" ID in 20', 30', 40' and 50' lengths.      Used for: Medium pressure (2500psi) oil, gear
oil, anti-freeze and ATF applications.       Sold with hose. All brass swivel joints w/double
o-ring seals are secured independently from other moving parts. Reel turns on a bronze,
self-lubricating bearing fitted to a solid 1" diameter axle. Parts are powder coated or treated
before assembly. Aluminum spring arbor releases spring in case of backlash.

  
Parts
(85kb)
    
  LINCOLN LFR SERIES — Type: Spring rewind with select models including hose end
grease control valve and universal swivel.        For hose sizes: 1/4" ID (30', 50'),      
3/8" (50').       Used for: High pressure (5000psi for 1/4" hose and 4000psi for 3/8" hose)
grease service.        All models sold with hose, connecting hose and ball stop.

      
  ALEMITE 8078 SERIES — Type: Spring rewind.      For hose sizes: 1/4" ID (30', 50').       
Used for: High pressure (2000psi) grease service.     Sold with hose, connecting hose
and ball stop. 

  
Parts
(776kb)
    
Stainless Steel Hose Reels            
  COX REELS MODELS P, SH & MP — Type: Stainless steel spring rewind.       For hose
sizes: 3/8" ID (21/32" OD), 3/8" ID (5/8" OD), 1/2" ID (27/32" OD), 1/2" ID (3/4" OD), 3/4" ID
(1" OD).     Maximum pressures: 300psi (3/8" with 21/32" OD; 1/2" with 27/32" OD, 3/4");
2500psi (1/2" with 3/4" OD); 3000psi (3/8" with 5/8" OD).      Sold without hose. High quality
electropolished stainless steel with stainless steel fluid paths.

  
Parts
(P & SH only)
(52kb)
    
 

HANNAY REELS MODEL SSN700 — Type: Galvanized spring rewind.       For hose sizes:
1/4" ID (5/8" OD), 3/8" ID (3/4" OD), 1/2" ID (7/8" OD).       Maximum pressure: 3000psi
standard with up to 10,000psi available as an option.      Supplied without hose. Includes
declutching arbor to prevent damage from reverse winding. Standard outlet connection is 1/2"
FPT. Temperature range is +40° to 400° F. Consult factory for temperatures outside the given
range. Stainless steel finish is a standard, unpolished mill. Two optional polished finishes are
available.

  
   
  HANNAY REELS MODEL SS800 —— Type: Galvanized spring rewind.       For hose sizes:
3/4" ID (1 9/32" OD), 1" ID (1 9/16" OD).       Maximum pressure: Up to 1000psi.      Supplied
without hose. Includes declutching arbor to prevent damage from reverse winding. Standard
outlet connection is 1" FPT. Temperature range is +20° to 400° F. Consult factory for
pressures or temperatures outside the given range. Stainless steel finish is a standard,
unpolished mill. Two optional polished finishes are available.

        
  COX REELS 100 SERIES — Type: Stainless steel manual rewind.       For hose sizes: 1/2" ID
(7/8" OD), 3/4" ID (1 1/4" OD).       Maximum pressure: 4000psi       Sold without hose.
High quality electropolished stainless steel with stainless steel fluid paths.		  
Parts
(64kb)
    
Items above are not representative of our entire product line. They are for information/assistance purposes.