|
|
|
|---|---|---|
Specializing in the sales, service and installation of petroleum equipment |
| Alarms and monitors (electronic) |
||||||||||
| Battery | ||||||||||
 MR918-0100AG |
MORRISON BROTHERS 918 SERIES
— •Mechanical aboveground tank level gauge w/audible high level alarm. •Alarm uses two 9v batteries. •High level alarm is set during installation and can be re-set at any time for changes in alarm requirements. •Intrinsically safe alarm unit is mounted remote from the tank. •90dB high pitched 'beep' cycle alarm has a test/cancel switch •Clock face level display (hour hand equating feet and minute hand indicating inches). •Use of a drop tube is recommended for installation to prevent float 'drift'. |
MODEL |
DESCRIPTION |
Inquiries? Call us 8am-5pm Pacific time, or email us. |
||||||
 |
OPW 444TA SERIES
— •High level alarm uses long-life lithium battery. •Designed to sense up to four high liquid levels. •Intrinsically safe alarm unit is mounted remote from the tank. •90dB audible alarm (at 4'). •36" float sub-assembly (assemblies) ordered separately . •All components are safe for temperatures to -40° or +120° F. |
MODEL |
DESCRIPTION |
DOCS Features |
||||||
| Electric | ||||||||||
 PNLC1002 |
PNEUMERCATOR LC1000 SERIES
— •Offers up to four channels for audible (85db minimum) and visual (red light) notification of incidents such as high or low level, leak indication). •Accomodates non-discriminating leak sensors (does not differentiate between water and petroleum). •Supplied with reset button to silence alarm and a button to test the alarm circuits. •Includes one dry switch contact per channel (SPDT, rated 3 amps @ 120v, selectable as either normally open or normally closed). •Uses up to 5000' of 2 conductor 18AWG cable. •Housed in NEMA 4 weatherproof enclosure. |
MODEL |
DESCRIPTION |
|||||||
 PNLS600AB-8  PNLS600-B12  PNLS600LDBN |
PNEUMERCATOR SENSORS/PROBES
— For use with LC1000 series. •LS600 level switches: Available in two different configurations with one to four actuation points. Model LS600 includes a die cast aluminum housing, NEMA 4 rated with a 1/2" conduit fitting. Model LS600A does not have the housing or conduit fitting. Choose between brass or stainless steel shafts with stainless steel floats. •Non-discriminating float switches: Provides secondary containment leak detection for above- and underground storage tanks as well as in dispenser pans and turbine sumps. Utilizes magnetic float/hermetically sealed reed switch technology and offered with a choice of Buna-N float/brass shaft/ PVC wiring, Buna-N float/316SS shaft/ PVC wiring or 316SS float and shaft/ Teflon® wiring. |
MODEL |
DESCRIPTION |
|||||||
 PNLC2008 |
PNEUMERCATOR LC2000 SERIES
— •Discriminating leak detection alarm. •Offers four to sixteen channels for audible (85dB minimum) and visual (ultra-high intensity strobe LED) notification of leak detection. •Offers three ultra-high intensity LEDs per sensor input, visible from 75': green (normal), red (oil), amber (water). •Accomodates both discriminating and non-discriminating sensors. •Includes as standard one RS-232 and one RS-485 port w/RJ-13 jacks (options include an internal, secure phone modem or fax modem, ethernet card. •Includes as standard two relay outputs with options for four, eight or 16 out- puts. •Uses up to 5000' of 2 conductor 18AWG cable. •Integrel impact printer optional. •Standard housing is a locking NEMA 12 (not suitable for outdoor use). Options available for NEMA 4 and NEMA 4X. |
MODEL |
DESCRIPTION |
|||||||
 PNE825-100F  PNE825-100CF |
PNEUMERCATOR SENSORS — For use with LC2000 series. Assorted sensor offerings include: •Electronic non-discriminating sensors, including three specific applications (Fuel/water use, chemical/high temp- erature use and low-temperature arctic use. •Discriminating sensors for sumps and dry interstitial spaces. |
MODEL |
DESCRIPTION |
©2009 Mascott Equipment Co |