|
|
|
|---|---|---|
Specializing in the sales, service and installation of petroleum equipment |
| Tank Accessories AST fill |
||||||||||
 MR179M-0100AC |
MORRISON 179 SERIES FILL CAPS — •Loose seal style hinged fill cap, available in aluminum and cast iron. •Padlockable. •Choice of MPT or FPT connection. |
MODEL |
DESCRIPTION |
DOCS Features |
Inquiries? Call us 8am-5pm Pacific time, or email us. |
|||||
 MR178-0100AC |
MORRISON 178 SERIES FILL CAPS — •Two piece thread-on cap assembly. Iron body and cap. Options: iron body and brass cap, brass body and iron cap, or brass body and brass cap. •Padlockable. •FPT base connection. |
MODEL |
DESCRIPTION |
DOCS Features |
||||||
 CT60002 |
CIM-TEK MODEL 60002 FILL CAP — •Two piece lockable assembly rimarily used on small stationary and transfer tanks. •Allows up to 30gpm removal of product. •pressure valve opens at 2.5psi to relieve pressure, while the vacuum release valve opens at 1.5psi. •Lockable. •Mounts to 2" tank opening. |
MODEL |
DESCRIPTION |
DOCS Features |
||||||
 MR517F-0100AC |
MORRISON MODEL 517 CONTAINMENT — •3.5 gallon capacity. •Lockable hinged lid. •White powder coated steel construction. Available with either MPT or FPT threads. •'WO' model includes removeable screen on the inside of the containment so used filters can drain, etc. MPT threads only. |
MODEL |
DESCRIPTION |
DOCS Features |
||||||
 MR518-0100AC |
MORRISON MODEL 518 CONTAINMENT — •7.5 gallon capacity. •Lockable hinged lid. •White powder coated steel construction. Available with either MPT or FPT threads. •'WO' model includes removeable screen on the inside of the containment so used filters can drain, etc. MPT threads only. •Standard female threaded model has offset mount and comes with 4" connection only. Center-mount male threaded version comes in either 2" or 4". |
MODEL |
DESCRIPTION |
DOCS Features |
||||||
 MR515-0400AC |
MORRISON MODEL 515 CONTAINMENT — •15 gallon capacity. •Lockable hinged lid. Supplied with a single column pedestal base, locking ball valve drain. •White powder coated 12 gauge steel construction. •Available with single or dual port FPT penetrations (dual port penetration examples: a product line and a vapor recovery line, or two product lines). •Option for containment less pedestal. •Port sizes available in 2", 3" or 4". |
MODEL |
DESCRIPTION |
DOCS Features |
||||||
Overfill prevention |
||||||||||
 MR9095A |
MORRISON MODEL 9095A VALVE — •Overfill prevention valve installed at the fill port of an aboveground tank. •Available in 2" and 3". It is imperative to note that the 2" valves requires a 4" tank opening for installation, and that the 3" valve requires a 6" tank opening. •Terminates flow of product into the tank when the liquid level reaches a pre-set shutoff point (typically 90% to 95% of tank capacity). Allows full flow of product up to within one to two seconds of the valve's closing. Cushioned shutoff prevents abrupt kickback or jolt in the line. •The 2" valve is normally used on above- ground tanks utilizing 'top fill', or making the fill connection at the top of the tank. The 3" valve, meanwhile, is used in 'low fill' or remote fill applications, where the fill connection is at ground level and piping carries product to the top of the tank in the fueling process. •Requires tight delivery connection when using. Many 9095A valves are supplied with camlock fitting at hose connection end. Mascott stocks the models with male camlock adapter ends. Dust cap must be ordered separately. |
MODEL |
DESCRIPTION Valve, overfill, 3" FPT x 6" |
DOCS Features 9095A 9895A aviat Install/Ops 9095A 2" 9095A 3" |
||||||
Vents |
||||||||||
 MR155-0500AV |
MORRISON MODEL 155 TEE VENT — •Aluminum open vent (no pressure/vacuum features) designed primarily for small fuel oil storage tanks. •Air outlet ports are on either side of the threaded connection, screened with 20 mesh stainless steel to keep bugs and debris out of the vent airway. •Open vents will allow unrestricted evaporation of product. •Sizes .75" to 3". Threaded style stocked, slip-on style available as optional. |
MODEL |
DESCRIPTION |
DOCS Features |
||||||
 OPW23-0033 |
OPW MODEL 23 UPDRAFT VENT — •Aluminum body and cap open vent (no pressure/vacuum features). •40 mesh brass wire screen keeps debris and insects from getting into the vent line. •Open vents will allow unrestricted evaporation of product. •Sizes .2" and 3". Threaded style stocked, slip-on style available as optional. |
MODEL |
DESCRIPTION |
DOCS Features |
||||||
 |
PROTECTOSEAL 670/6670 SERIES — •Circular flame-arresting open vent (no pressure/vacuum features). •Used in applications where vapor conservation is not required but where low flash-point liquids must be protected against fire and explosion from external sources of ignition. •All stainless steel construction optional. •Available in 1" through 4". The 1" and 2" models of this vent are UL-labeled. |
MODEL |
DESCRIPTION |
DOCS Features |
||||||
 HK5885 |
HUSKY MODEL 5885 P/V VENT — •CARB-approved pressure/vacuum vent that utilizes three separate valves to control over-pressure and vacuum issues in storage tanks. •Diaphragm-operated vacuum valve provides 10x greater sealing force than gravity devices.Consistently opens at 6" to 10" of water column vacuum. •The first over-pressure valve is also diaphragm operated, with the same sealing force benefit. It opens at 2.5" to 6" of water column pressure. •The safety over-pressure valve is designed for high pressure/high flow situations, venting up to 7900 SCHH @ 2psi. •Available in 2" only. |
MODEL |
DESCRIPTION |
DOCS Features |
||||||
 OPW623V-2203 |
OPW MODEL 623V P/V VENT — •Pressure/vacuum vent featuring a Duratuff® corrosion-resistant composite body. •Factory preset and tested settings: 3" water column pressure and 8" water column vacuum. •100 mesh stainless steel screen. •Offered in 2" and 3". |
MODEL |
DESCRIPTION |
DOCS Features |
||||||
Emergency vents |
||||||||||
 MR244OM-0200AV |
MORRISON MODEL 244 EMERGENCY VENT — |
MODEL |
DESCRIPTION |
DOCS |
||||||
| Specialty Vents |
||||||||||
 MR153B |
MORRISON MODEL 153B VENT — •Pressure/vacuum vent for barge/tanker applications. •All brass construction (model 153B) carries USCG approval #162.017/179/0. Optional all 316 stainless steel construction (model 153BSS) is Coast Guard approved as well (#162.017/178/0). •Standard vacuum setting is 1.5psi. •Pressure setting options vary from 1.5psi to 32psi. •2.5" connection. |
MODEL |
DESCRIPTION |
DOCS Features |
||||||
 MRV20B |
MORRISON PMC SERIES VENT CHECK VALVE — •Inverted valve used to vent fuel supplies on offshore supply vessels, tugs and towboats. •Brass or cast iron body. Either type of body comes with a stainless steel ball float and a brass and galvanized support screen. Brass and plastic ball floats are available options. •Available in sizes 1.5" to 6" |
MODEL |
DESCRIPTION |
DOCS Features |
©2009 Mascott Equipment Co |