|
|
|
|---|---|---|
Specializing in the sales, service and installation of petroleum equipment |
| Tank Accessories UST Fill |
||||||||||
 OPW1-2100E |
OPW 1-2100-EVR SERIES — •Thread-on style. EVR certified. •No external connections to make; adjust the final grade height and support the manway with backfill. •Available with integrel pull-to-open drain valve for product drop applications and with plugged drain for dual-point Stage II vapor recovery scenarios. •Five, 7.5 and 15 gallon capacities with choice of Duratuff® or cast iron base and aluminum or cast iron cover. |
MODEL Fill OPW1-2100DEVR OPW1C-2100DEVR OPW1-2100EDEVR OPW1C-2100EDEVR OPW1-2115DEVR OPW1C-2115DEVR Stage II Vapor OPW1-2100PEVR OPW1C-2100PEVR OPW1-2100EPEVR OPW1C-2100EPEVR OPW1-2115PEVR OPW1C-2115PEVR Parts OPW1DK-2100-EVR OPW1-21AC OPW1-21CC OPWH12229M OPW1PPK-2100 OPW1DP-2100 |
DESCRIPTION |
Inquiries? Call us 8am-5pm Pacific time, or email us. |
||||||
 OPW1SC-2100 |
OPW 1SC-2100-EVR
SERIES — •Sealable lid operates on 'plumbers plug' principle: when the lever is latched down plates are drawn together, expanding the seal against the machined mounting ring wall. •Ideal for areas with high water tables, areas subject to tropical rain or standing water and cold regions where melting snow and road salt can enter standard spill containment manways. •Available with integrel pull-to-open drain valve for product drop applications and with plugged drain for dual-point Stage II vapor recovery scenarios. •Five, 7.5 and 15 gallon capacities with choice of Duratuff® or cast iron base and aluminum or cast iron cover. |
MODEL Fill OPW1SC-2100DEVR OPW1SC2100EDEVR OPW1SC-2115DEVR Stage II Vapor OPW1SC-2100PEVR OPW1SC2100EPEVR OPW1SC-2115PEVR Parts OPWC04158 OPWH13931M OPWC04101B OPWD01874M OPWC04141M OPWH12927M OPW1SC-TOOL OPW1DK-2100-EVR |
DESCRIPTION |
DOCS Features Install/Ops |
||||||
 OPW101BG-2100 |
OPW 101BG-2100
SERIES — •Below-grade design leaves the watertight spill containment chamber installed completely below grade level, with the grade level cover laying flush with the driveway grade. •Tripping hazard and potential for damage from snow plows and traffic are reduced. •Available in five and 15 gallon capacities. •Unique hinged and sealed lid provides vapor tight seal and eliminates the accumulation of dirt and water that contaminate fuel. •Like all OPW spill containers and manways, exceeds requirements of Highway 20 (H-20) load ratings. |
MODEL OPW101BG-2100 OPW101BG-205S OPW101BG-2115 OPW101BG-215S Parts OPW1DK-2100-EVR OPW101BG-21AR OPW101BG-21LA OPW101BG-LATCH OPW101BG-BUCKET OPWC04785M OPWC04476M OPWD01747M OPWE00491 OPWH11671M OPWH12280M OPWH12620 OPWP110-20LID |
DESCRIPTION |
DOCS Features Install/Ops |
||||||
 OPW61SALP-1020 |
OPW MODEL 61SALP FILL ADAPTER — •EVR approved 4" fill adapter that features a top section that rotates with hose movement while the bottom section remains securely in place, maintaining seal integrity while eliminating a persistent source of leakage during pressure decay testing. •Bronze construction features dual seals for a liquid and vapor-tight seal and a self- lubricating retaining rod ensuring a maintenance-free, reliable service life. |
MODEL OPW61SALP-1020EVR Parts OPWH09039M |
DESCRIPTION |
DOCS Features Install/Ops |
||||||
 OPW634TT-7085 |
OPW MODEL 634TT TOP SEAL FILL CAP — •Heavy duty, corrosion-resistant, EVR approved 'toggle-style' fill cap. •Toggle lever distributes downward pressure compressing the Buna-N gasket evenly for a positive, vapor and water tight seal. •Lockable with a padlock or wire seal. •4" cap is designed to mate with OPW's 61SALP, 61SA, 633T, 633TC, 633TE, 633TT and 633TEC series top seal adapters. |
MODEL OPW634TT-7085EVR Parts OPWH15005M |
DESCRIPTION |
DOCS Features Install/Ops |
||||||
 OPW634LPC-0400 |
OPW MODEL 634LPC TOP SEAL FILL CAP — •Designed for tight installations where space between the underside of the spill containment cover and the fill adapter is limited. •.5" effective height above fill adapter. •Cam-action iron lever seats cap firmly in the adapter groove. •4" cap is designed to mate with OPW's 61SALP, 61SA, 633T, 633TC and 633TE series top seal adapters. |
MODEL OPW634LPC-0400 Parts OPWH15005M |
DESCRIPTION |
DOCS Features Install/Ops |
||||||
Drop tube & fill limiter |
||||||||||
 OPW71SO |
OPW MODEL 71SO OVERFILL VALVE ASS'Y — •Mechanical two stage, positive shutoff overfill prevention valve.drop tube ass'y. •Available for direct bury and remote fill applications. The only vapor-tight overfill valve in the industry not requiring epoxy sealants. •Three variations for tank diameters to 12': –Model 71SO-400C for 8' diameter tanks (60" upper tube length, 155.75" overall length). –Model 71SO-410C for 10' diameter tanks (120" upper, 234.75" overall). –Model 71SO-720C for 12' diameter tanks (120" upper, 258.75" overall). |
MODEL OPW71SO-400C OPW71SO-410C OPW71SO-420C Parts OPW71SO-TOOL OPW61JSK-44CB OPW61JSK-4410 OPW61JSK-4RMT OPW61SOK-001 OPWH11931M OPWH14840M |
DESCRIPTION |
DOCS Features Install/Ops |
||||||
Stage I Vapor Recovery |
||||||||||
 OPW61VSA-1020 |
OPW MODEL 61VSA VAPOR ADAPTOR — •EVR certified swivel adapter for areas in need of Stage I vapor recovery compliance. •Top section that rotates with hose move- ment while the bottom section remains securely in place to the 4" tank riser. •Self-guiding poppet provides consistent tight seal. |
MODEL OPW61VSA-1020EVR Parts OPWH09039M OPW61SA-TOOL |
DESCRIPTION |
DOCS Features Install/Ops |
||||||
 OPW1711T-7085 |
OPW MODEL 1711T TOP SEAL VAPOR CAP — •Heavy duty, corrosion-resistant, EVR approved 'toggle-style' vapor adapter cap. •Toggle lever distributes downward pressure compressing the Buna-N gasket evenly for a positive, vapor and water tight seal. •Lockable with a padlock or wire seal. •3" cap is designed to mate with OPW's 61VSA, 1611AV, 1611AVB and 1611VR series top seal vapor adapters. |
MODEL OPW1711T-7085EVR Parts OPWH10886M |
DESCRIPTION |
DOCS Features Install/Ops |
||||||
 OPW1711LPC-0300 |
•Designed for tight installations where space between the underside of the spill containment cover and the fill adapter is limited. •.5" effective height above fill adapter. •Cam-action iron lever seats cap firmly in the adapter groove. •3" cap is designed to mate with OPW's 61VSA, 1611AV, and 1611AVB series top seal vapor adapters. |
MODEL OPW1711LPC-0300 Parts OPWH15005M |
DESCRIPTION |
DOCS Features Install/Ops |
||||||
Vents |
||||||||||
 HK5885 |
HUSKY MODEL 5885 P/V VENT — •CARB-approved pressure/vacuum vent that utilizes three separate valves to control over-pressure and vacuum issues in storage tanks. •Diaphragm-operated vacuum valve provides 10x greater sealing force than gravity devices.Consistently opens at 6" to 10" of water column vacuum. •The first over-pressure valve is also diaphragm operated, with the same sealing force benefit. It opens at 2.5" to 6" of water column pressure. •The safety over-pressure valve is designed for high pressure/high flow situations, venting up to 7900 SCHH @ 2psi. •Available in 2" only. |
MODEL |
DESCRIPTION |
DOCS Features |
||||||
 OPW623V-2203 |
OPW MODEL 623V P/V VENT — •Pressure/vacuum vent featuring a Duratuff® corrosion-resistant composite body. •Factory preset and tested settings: 3" water column pressure and 8" water column vacuum. •100 mesh stainless steel screen. •Offered in 2" and 3". |
MODEL |
DESCRIPTION |
DOCS Features |
||||||
 PS6672 |
PROTECTOSEAL 670/6670 SERIES — •Circular flame-arresting open vent (no pressure/vacuum features). •Used in applications where vapor conservation is not required but where low flash-point liquids must be protected against fire and explosion from external sources of ignition. •Open vents will allow unrestricted evaporation of product. •All stainless steel construction optional. •Available in 1" through 4". The 1" and 2" models of this vent are UL-labeled. |
MODEL |
DESCRIPTION |
DOCS Features |
||||||
 OPW23-0033 |
OPW MODEL 23 UPDRAFT VENT — •Aluminum body and cap open vent (no pressure/vacuum features). •40 mesh brass wire screen keeps debris and insects from getting into the vent line. •Open vents will allow unrestricted evaporation of product. •Sizes .2" and 3". Threaded style stocked, slip-on style available as optional. |
MODEL |
DESCRIPTION |
DOCS Features |
||||||
 MR155-0500AV |
MORRISON MODEL 155 TEE VENT — •Aluminum open vent (no pressure/vacuum features) designed primarily for small fuel oil storage tanks. •Air outlet ports are on either side of the threaded connection, screened with 20 mesh stainless steel to keep bugs and debris out of the vent airway. •Open vents will allow unrestricted evaporation of product. •Sizes .75" to 3". Threaded style stocked, slip-on style available as optional. |
MODEL |
DESCRIPTION |
DOCS Features |
©2009 Mascott Equipment Co |